Ultraviolet Flame Detector AW-FD602-UV

The device is an Ultraviolet-only flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects in the ultraviolet (UV) spectral range for optimized speed of response.

Description

The device is an Ultraviolet-only flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects in the ultraviolet (UV) spectral range for optimized speed of response.

It is fast and capable to detecting the ultraviolet (UV) rays emitted by a burning substance and is used in high hazard applications such as petrochemical plants, munitions factories and other areas where flammable or explosive liquids or solids are handled or stored.

The flame sensor adopts an ultraviolet photosensitive tube, with qualities of highly sensitive, reliable, dust-resistant, corrosion proof and moisture-resistant, therefore is not sensitive in sunlight, dust, oil, tolerance of fume, and humidity. Set in a standard calibration to detect a flames at a distance of 25 meters, which flame created by 2Kg ethanol in a Container of Base 33cmX33cm, Height 5cm.

Technical Parameters

Operating Voltage Range 12 to 30 VDC Volts
Standby Current  ≤10 mA @ 24 VDC
Alarm Current ≤30 mA @ 24 VDC
Spectrum 180~290nm
Detection Angle  110 degree
Detection Sensitivity  Grade I, 25m@flame (Container 33cmX33cm,

Height 5cm with 2Kg ethanol )

Relay Contact Load 1A@DC24V
Normal Status  LED blinking in 5 seconds interval
Alarm Status LED lit steady
Protection rating IP 32
Operating Humidity Range 10% to 93% Relative Humidity, Non-condensing
Operating Temperature Range -10°C to 50°C (14°F to 122°F)
Height 1.8˝ (45 mm) installed in Base
Diameter 4.0˝ (103 mm)
Weight 5.4 oz. (153g)

Reviews

There are no reviews yet.

Be the first to review “Ultraviolet Flame Detector AW-FD602-UV”

Your email address will not be published. Required fields are marked *

Back to top of page